Mechanical Engineering/Aerospace Engineering at University of Southampton - UCAS

University of Southampton

Degree level: Undergraduate

Mechanical Engineering/Aerospace Engineering

University of Southampton has participated in the Teaching Excellence Framework. These ratings were awarded in 2023, for four years.

See why these ratings were awarded

Find out more about the TEF

Open days

27Nov

University of Southampton - Open Day Event

Undergraduate

Course summary

This integrated masters degree will develop your expertise in aerospace systems, while maintaining the broad-based background associated with mechanical engineering. The first two years are the same across our Mechanical Engineering degrees and focus on the essential principles of mechanical engineering, as well as law and management, systems design, and modelling and computing, in order to take a product from initial concept to the marketplace. During your third and fourth years you will focus on aircraft aerodynamics, propulsion, avionics and structural design. In your third year, you will also carry out an individual project, bringing together the concepts and skills you have learned. During your fourth year, you will take advanced and specialised modules and participate in a group design project, applying your engineering knowledge to solve a real-world problem. You will have access to extensive facilities, which include the largest wind tunnel in any UK university, a high-resolution 3D imaging centre, dedicated student design studios and workshops, and a materials and structures research facility in our new National Infrastructure Laboratory. Our courses are fully accredited by the Institution of Mechanical Engineers and offer a route to chartered status.

Modules

Typical modules include: Year one: An Introduction to Engineering Design; Electrical and Electronics Systems; Mathematics for Engineering and the Environment; Mechanics, Structures and Materials; Mechanical Systems Analysis; ThermoFluids. Year two: Engineering Management and Law; Fluid Mechanics; Materials and Structures; Mathematics for Engineering and the Environment Part II; Mechanics, Machines and Vibration; Systems Design and Computing; Thermodynamics; Electronics and Control. Year three: Individual Project; Aerothermodynamics; Engineering Design with Management; Finite Element Analysis in Solid Mechanics; Heat Transfer and Applications; Manufacturing and Materials; plus additional module options. Year four: Group Design Project; Applications of CFD; Aircraft Propulsion; Materials, Manufacturing, and Supply Chains; plus module options to deepen your knowledge.

Assessment method

Testing is conducted through a combination of unseen written examinations and assessed coursework in the form of problem-solving exercises, laboratory reports, design exercises, essays, and individual and group projects. Experimental, research and design skills are assessed through laboratory reports, coursework exercises and oral presentations.

Professional bodies

Professionally accredited courses provide industry-wide recognition of the quality of your qualification.

Mechanical Engineers, Institution of
Engineering Council
Accreditation of European Engineering Programmes (EUR-ACE)

How to apply

29Jan

This is the deadline for applications to be completed and sent for this course. If the university or college still has places available you can apply after this date, but your application is not guaranteed to be considered.

Application codes

Course code:: HH34

Institution code:: S27

Campus name:: Main Site - Highfield Campus

Campus code:: -

Points of entry

The following entry points are available for this course:

Year 1

International applicants

Find out about equivalent entry requirements and qualifications for your country: https://www.southampton.ac.uk/uni-life/international/your-country.page

Entry requirements

Qualification requirements

UCAS Tariff - Not accepted

A level - A*AA

A*AA including mathematics (minimum grade A) and physics (minimum grade A), with a pass in the physics Practical (where it is separately endorsed). If you are taking an EPQ in addition to 3 A levels, you will receive the following offer in addition to the standard A level offer: AAA including mathematics and physics, with a pass in the physics Practical (where it is separately endorsed) plus grade A in the EPQ. We are committed to ensuring that all applicants with the potential to succeed, regardless of their background, are encouraged to apply to study with us. The additional information gained through contextual data allows us to recognise an applicant's potential to succeed in the context of their background and experience. Applicants who are highlighted in this way will be made an offer which is lower than the typical offer for that programme. Applicants who have not studied the required subjects at A-level can apply for the Engineering/Physics/Mathematics Foundation Year.

Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016) - Not accepted

Access to HE Diploma - Not accepted

Scottish Higher

Offers will be based on exams being taken at the end of S6. Subjects taken and qualifications achieved in S5 will be reviewed. Careful consideration will be given to an individual’s academic achievement, taking in to account the context and circumstances of their pre-university education. Please see the University of Southampton’s Curriculum for Excellence Scotland Statement (PDF) for further information. Applicants are advised to contact their Faculty Admissions Office for more information.

Pearson BTEC Level 3 National Extended Certificate (first teaching from September 2016) - D - D*

D in the BTEC National Extended Certificate plus grades A*A in A-level mathematics and physics (the A* can be in either subject), with a pass in the physics Practical (where it is separately endorsed) or D* in the BTEC National Extended Certificate plus grades AA in A-level mathematics and physics, with a pass in the physics Practical (where it is separately endorsed). Applicants who have not studied the required subjects at A-level can apply for the Engineering/Physics/Mathematics Foundation Year.

Pearson BTEC Subsidiary Diploma (QCF) - D - D*

D in the BTEC Subsidiary Diploma plus grades A*A in A-level mathematics and physics (the A* can be in either subject), with a pass in the physics Practical (where it is separately endorsed) or D* in the BTEC Subsidiary Diploma plus grades AA in A-level mathematics and physics, with a pass in the physics Practical (where it is separately endorsed). Applicants who have not studied the required subjects at A-level can apply for the Engineering/Physics/Mathematics Foundation Year.

Scottish Advanced Higher

International Baccalaureate Diploma Programme - 38 points

Welsh Baccalaureate - Advanced Skills Challenge Certificate (last awarded Summer 2024) - A

A*AA including mathematics (minimum grade A) and physics (minimum grade A), with a pass in the physics Practical (where it is separately endorsed) or A*A from two A levels including mathematics and physics (the A* can be in either subject), with a pass in the physics Practical (where it is separately endorsed) and A from the Advanced Welsh Baccalaureate Skills Challenge Certificate. Applicants who have not studied the required subjects at A-level can apply for the Engineering/Physics/Mathematics Foundation Year.

Extended Project - A

If you are taking an EPQ in addition to 3 A levels, you will receive the following offer in addition to the standard A level offer: AAA including mathematics and physics, with a pass in the physics Practical (where it is separately endorsed) plus grade A in the EPQ. Applicants who have not studied the required subjects at A-level can apply for the Engineering/Physics/Mathematics Foundation Year.

Leaving Certificate - Higher Level (Ireland) (first awarded in 2017) - H1, H1, H1, H2, H2, H2

Cambridge International Pre-U Certificate - Principal - D2, D3, D3

GCSE/National 4/National 5

OCR Cambridge Technical Diploma - DD - D*D

OCR Cambridge Technical Extended Certificate - D - D*

Typical entry criteria will be to achieve a grades A*A in Maths and Physics at A-level plus D in the Technical Extended Certificate or grades AA in Maths and Physics at A-level plus D* in the Technical Extended Certificate. A pass in the physics Practical is required where it is separately endorsed. Applicants who have not studied the required subjects at A-level can apply for the Engineering/Physics/Mathematics Foundation Year.

AQA Level 3 Technical Level (720 glh) - DD - D*D

Typical entry criteria will be to achieve Grade A* in A-level Maths plus DD in the Tech Level or Grade A in A-level Maths plus D*D in the Tech Level Accepted subjects: Engineering. Must be offered in combination with A-level Mathematics and units M1 and M2 must be taken. Applicants who have not studied mathematics at A-level can apply for the Engineering/Physics/Mathematics Foundation Year.

T Level - Not accepted

If you are not sure that your qualifications meet the requirements of this course please contact our Admissions Teams.

Please click the following link to find out more about qualification requirements for this course

https://www.southampton.ac.uk/engineering/undergraduate/courses/mechanical_engineering/h390_meng_mechanical_engineering_automotive.page#entry_requirements%0A____________________

English language requirements

Test	Grade	Additional details
IELTS (Academic)	6.5	with no component below 6.0

All programmes at the University of Southampton are taught and assessed in the medium of English (other than those in modern foreign languages). Therefore, all applicants must demonstrate they possess at least a minimum standard of English language proficiency.

Find out more about the University’s English Language requirements

https://www.southampton.ac.uk/studentadmin/admissions/admissions-policies/language.page

Student Outcomes

Operated by the Office for Students

Employment after 15 months (Most common jobs)

Go onto work and study

The number of student respondents and response rates can be important in interpreting the data – it is important to note your experience may be different from theirs. This data will be based on the subject area rather than the specific course. Read more about this data on the Discover Uni website.

Fees and funding

Tuition fees

England	£9250	Year 1
Northern Ireland	£9250	Year 1
Scotland	£9250	Year 1
Wales	£9250	Year 1
Channel Islands	£9250	Year 1
Republic of Ireland	£9250	Year 1
EU	£29400	Year 1
International	£29400	Year 1

Tuition fee status depends on a number of criteria and varies according to where in the UK you will study. For further guidance on the criteria for home or overseas tuition fees, please refer to the UKCISA website .

Additional fee information

Please see our website for further details and updates: www.southampton.ac.uk/uni-life/fees-funding.page

Provider information

Visit our website

University of Southampton
Highfield
Southampton
SO17 1BJ

Course contact details

Visit our course page

View address on Google Maps

Location	Qualification	Study mode	Duration	Start date	Apply
Main Site - Highfield Campus	MEng (Hon) - Master of Engineering (with Honours)	Full-time	4 years	22 September 2025	Available to Apply	Course option 76e82946-bfe1-470d-b0ab-89e345001c26